Contract Hardware Inc - 404-350-9408 - Door Info Form
Name:   Phone:
Company:   Fax:
Department:   Email:
Address:   Products: ">
City:   Message:
State:    
Zip:    



Hardware Location Info:
A. Top of door to top of 1st hinge
B. Top of door to top of 2nd hinge
C. Top of door to top of 3rd hinge
D. Height of hinge (3-1/2”, 4”, 4-1/2”)
E. Outside face of door
F. Inside face of door
G. Top of door to middle of lock faceplate on edge of door (Do not do if lock has 8” faceplate)
H. Height of door
I. Top of door to top of lock faceplate
J. Height of lock faceplate (2-1/4” or 8”)
K. Thickness of door (1-3/8” or 1-3/4”)

Additional Door Info:
Frame Material - Wood, Steel, or Aluminum
Door Material - Wood, Steel, Plastic Laminate, or Aluminum
Solid Core or Hollow Core
Location of Door(s) - Interior or Exterior
      Room?
 Labeled? - Yes or No
      if Yes, what is rating? 20, 45, 60, 90 Min or 3 Hr: UL or WHI
Lock Manufacturer/Number
Panic Device, Cylindrical or Mortise Lock
Handing of Lock: RH, LH, RHR, or LHR

Questions to Help Determine Type of Door Being Replaced:
Type of Door - Flush or 6 Panel
Hinge Mounting - Surface or Mortise
Edge of Door - Wood or Metal
Note: If Entry doors supplied from our stock, they will have metal faces with wood edges.  If metal edge is required, then the door is Special Order and will incur additional cost and/or longer lead times.
Lock Manufacturer: Saflock, Onity (Tesa), Ving Card, Kaba, Other
Lock Model Number

Note: Entry Doors supplied will have Metal Faces with Wood Edges.  (Wood edges allow us to machine the door(s) to your hardware locations.)
Door size will be: 35-13/16” x 79” x 1-3/4” (plus door bottom sweep).
Mortise Lock prep will be prepped for mortise pocket only. Trim function holes by others.

All Doors are shipped without frames unless ordered separately.
 Complete and click 'Send' button.  
You may also print and fax to 404-350-9529.
Someone will contact you shortly.